ECB and PCA GUIDANCE: Head protectors/helmets

 

The ECB and PCA strongly encourage all cricket clubs and cricketers to review their existing head protector equipment. In this Guidance Note, references to “head protectors” means helmets with a faceguard or grille.

 

The design and manufacture of cricket head protectors is now governed by British Standard  BS7928:2013 , which has been adopted by the ICC as the international standard. The standard ECB/PCA playing contract for professional cricketers also specifies that any helmet provided to a player by his employer club must meet this safety standard.

 

Note that  BS7928:2013  specifies different tests for helmets to be used in senior and junior cricket, reflecting the smaller ball size used in the latter.

The helmets listed below at Section 6 are those for which evidence has been provided to the ECB by the relevant manufacturer that the standard has been met and the appropriate authority to display a “CE quality mark” granted.

 

That list distinguishes between helmets which are approved for use in senior and junior cricket, and also includes some helmets which have been approved for use at both levels. 

 

1.  Key Features of the New Safety Specification

 

The key features of the new specification,  BS7928:2013 , are:

  • it now includes a facial contact projectile test that assesses for penetration of the ball through the faceguard, and contact of the faceguard onto the face, using realistic ball impact speeds and conditions.

  • head protectors have been tested separately against men’s and junior sized cricket balls (a five-and-a-half ounce ball and a four-and-three-quarter ounce ball, respectively). 

 

2.  Women’s cricket

 

There was neither a pre-existing specific women’s head protector nor is there any BSi specification for women’s cricket head protectors.

 

However, as the size of the standard women’s cricket ball is between the standard men’s and junior’s balls, it is recommended that women use head protectors which have been tested against both the men’s and junior sized ball or at least against the junior size ball (because the smaller ball could potentially get through the gap above the faceguard on a men’s head protector).

 

3.  Junior cricket

 

Since 2000, the ECB has published safety guidance regarding the wearing of head protectors by all cricketers under the age of 18. The ECB’s current guidance is that all cricketers under the age of 18 must wear a head protector whilst batting in matches or practice sessions. The ECB also now strongly recommends that junior players use head protectors which have been tested against the junior sized ball.

 

Wicketkeepers under the age of 18 should wear a head protector with a faceguard, or a wicketkeeper face protector, at all times when standing up to the stumps.

Any individual taking responsibility for any player(s) under the age of 18 should take reasonable steps to ensure this guidance is followed at all times. No parental consent to the non-wearing of a head protector should be accepted. 

 

4.  Risk of injury

 

Whilst the ECB and PCA consider that head protectors are an essential part of a cricketer’s kit to mitigate the risk of death, injury or disability, it must be remembered that wearing a head protector cannot entirely eliminate that risk. The new specification makes head protectors safer than before, but cannot eliminate the risk of injury. 

 

5.  Things to look out for in purchasing a new head protector

 

The ECB and PCA has issued this guidance in order to heighten understanding, so that informed decisions as to which head protectors to purchase and use can be made by all cricketers.

Head protectors that have been tested against and comply with the new specification will be clearly labelled “BS7928:2013”  and will contain clear labelling setting out whether the head protector has been tested against 

 

(i) a men’s standard ball size of 5 ½ ounces, 

(ii) a junior standard ball size of 4 ¾ ounces, or 

(iii) both men’s and junior size balls.

 

The list of known head protectors that have met BS7928:13 as of 16 February 2016 

Tested against men's balls:

 

Gray-Nicolls  


Atomic Helmet 
Test Opener Helmet 
Omega XRD

 

Gunn & Moore 


Icon Geo Senior Large 
Icon Geo Senior 
Icon Geo Senior Small
Purist Geo Senior

 

Kookaburra 


Pro 400 Senior 
Viper Senior 
Pro 800 Senior

 

Masuri 


Vison Series Elite Titanium 
Vision Series Elite Steel 
Vision Series Test Titanium 
Vision Series Test Steel 
Vision Series Club Senior  

 

Reader 


Sovereign Senior  

 

Shrey  


Master Class AIR Titanium 
Pro Guard AIR Titanium 
Master Class AIR Stainless Steel 
Pro Guard AIR Stainless Steel 
Armor Senior Steel 
Performance Senior Steel

 

Slazenger 


International

 
Tested against both men’s and junior balls: 

Gray-Nicolls 


Atomic Helmet 
Test Opener Helmet 
Omega XRD Helmet

 

Gunn & Moore 


Icon Geo Senior
Icon Geo Senior Small
Purist Geo Senior

 

Masuri  


Vision Series Elite Titanium
Vision Series Elite Steel
Vision Series Test Titanium
Vision Series Test Steel

 

Shrey  


Armor Senior Steel
Armor Junior/Youth Steel
Performance Senior Steel
Performance Junior/Youth Steel

 

Tested against junior balls: 

Gray-Nicolls 


Atomic Helmet 
Test Opener Helmet 
Omega XRD Helmet  

 

Gunn &  Moore 


Icon Geo Senior 
Icon Geo Senior Small
Icon Geo Junior
Purist Geo Senior 
Purist Geo Junior  

 

Kookaburra 


Pro 400 Junior 
Pro 400 Mini 
Pro 800 Junior 
Viper Junior  

 

Masuri 


Vision Series Elite Titanium
Vision Series Elite Steel
Vision Series Test Titanium
Vision Series Test Steel
Vision Series Club Boys
Vision Series Club Youths  

 

Reader 


Sovereign Junior 
Sovereign Mini

 

Shrey  


Armor Senior Steel
Armor Junior/Youth Steel
Performance Senior Steel
Performance Junior/Youth Steel

 

When a new helmet meets the BS7928:2013 standard, and are certified (CE) to be in conformity with Council Directive 89/686/EEC and associated amendments relating to personal protective equipment, manufacturers are asked to provide documentary evidence of this compliance to helmets@ecb.co.uk , so that the helmet can be added to the list. 

 

 

Please reload

© HECL 2018

Follow us

  • Twitter Clean